2023 Ultimate Guide to Fixing an Electric Skateboard that Won't Charge
May 22, 2023
- Ensuring Optimal Charging Cable and Adapter Connection
- Understanding Your Battery Management System (BMS)
- Checking the Battery Connection and Fuse
- Considering Lithium-Ion Battery Age and Capacity
- Inspecting Motor Sensors and Overload Protection
- Avoid Extreme Temperatures and Embrace Proper Ventilation
- Checking Ground Fault Circuit Breakers
- Diagnosing Issues Based on Skateboard Types and Sizes
- Turning to the Professionals: Manufacturer or Repair Shop Service
Electric skateboards have become a popular means of personal transportation for riders looking to cruise short distances in an eco-friendly way. With various types, sizes, and battery lives, there's an electric skateboard out there for everyone. However, their rechargeable lithium-ion battery systems can experience issues that prevent the board from charging properly. This comprehensive guide provides detailed steps for diagnosing and repairing an electric skateboard that won't charge, tailored to riders of all experience levels. By following this systematic troubleshooting process, you can get your electric skateboard charged and back to riding for miles.
Ensuring Optimal Charging Cable and Adapter Connection
- Properly inspect the charging port and both ends of the charging cable for any dirt, debris, or corrosion.
- Test the charging cable by plugging it directly into a wall outlet, surge protector, or charging strip.
- Make sure you're using the correct charger for your specific skateboard model.
- Replace any damaged cables or adapters with model-specific ones to prevent further issues.
Understanding Your Battery Management System (BMS)
- Reset the BMS according to your electric skateboard model's specific manual.
- If issues persist, consult a certified technician who can diagnose and potentially replace the BMS.
- Remember, the BMS controls the charging and discharging of the lithium-ion battery and may also control speed limits, braking systems, and temperature monitoring.
Checking the Battery Connection and Fuse
- Verify that the fuse for the charging circuit is intact and capable of conducting power.
- Inspect the physical connection between the battery and the charging system. Loose or corroded connectors can disrupt charging.
- If connections are damaged, or the fuse is blown, consult a professional repair expert.
Considering Lithium-Ion Battery Age and Capacity
- Perform a load test to check the remaining capacity of your battery. If it's below 70-80% of its original capacity, consider a replacement.
- Always replace with a battery specifically designed for your skateboard model to ensure safe and optimal performance.
- Different electric skateboards have different battery specifications, ensure you're familiar with your model's battery life expectancy.
Inspecting Motor Sensors and Overload Protection
- Check for physical damage or debris blocking the motor sensors. Cleaning or removing debris can sometimes solve the issue.
- If persistent issues arise, consult a certified electric skateboard technician for a thorough inspection and possible replacement of the faulty motor or sensor.
Avoid Extreme Temperatures and Embrace Proper Ventilation
- Ensure the skateboard has proper ventilation during charging to prevent overheating.
- Avoid charging in extreme heat. The optimal temperature range for charging is typically 65 to 80 degrees Fahrenheit or 18 to 27 degrees Celsius.
Checking Ground Fault Circuit Breakers
- Regularly check any GFCI outlets or breakers in the charging circuit to ensure they haven't been tripped. Reset them if necessary.
- Be aware that electric skateboards draw a considerable amount of power during charging which could potentially trip a GFCI outlet or circuit breaker.
Diagnosing Issues Based on Skateboard Types and Sizes
Different electric skateboard models have their own specific sets of issues. Here's a brief breakdown of what to look for based on the type and size of your skateboard:
- Standard Electric Skateboards: These skateboards are the most common type, and their issues usually revolve around the battery, motors, or BMS. Follow the steps mentioned above to diagnose any charging issues.
- Electric Longboards: These are generally more stable due to their size, but they may face issues related to the flex of the board affecting the wiring. Ensure all wires are securely attached and not strained during use.
- Off-Road Electric Skateboards: These are built for tough conditions and often have additional protection for their components. However, they might get dirty or wet, leading to issues. Always clean your skateboard after use and check for any signs of water or dirt ingress in the charging port or battery compartment.
- Mini Electric Skateboards: Due to their compact size, all components are tightly packed, which might lead to overheating issues. Ensure proper ventilation during charging and avoid using the skateboard in extremely hot conditions.
Turning to the Professionals: Manufacturer or Repair Shop Service
If all troubleshooting steps have been exhausted and your electric skateboard still refuses to charge, it may be time to turn to the professionals. Professional electric skateboard technicians have the expertise, experience, and specialized equipment to diagnose and repair complex issues safely and effectively. Here are some considerations to help you navigate this process:
Your first point of contact should be the manufacturer's customer support. Many reputable electric skateboard brands offer excellent after-sales service and can provide expert advice on any issues you may be facing. They may ask you to run through some troubleshooting steps over the phone or via email to ascertain the problem.
If your skateboard is still within its warranty period, the manufacturer may offer a free repair or replacement service. Before proceeding, make sure to check your warranty coverage and terms. Some manufacturers may require you to ship the skateboard to their service center, so be prepared for potential shipping costs.
Local Repair Shop Service
If your skateboard is out of warranty or you prefer a local solution, you can take it to a certified electric skateboard repair shop. These shops usually have technicians who are familiar with a wide range of models and can provide quick and reliable repairs. When choosing a repair shop, consider the following:
- Reputation and Reviews: Look for a shop with positive customer reviews and a solid reputation for quality service. You can find reviews on social media, and online directories, or ask for recommendations from other electric skateboard riders in your local community.
- Expertise: Ensure that the technicians are certified and experienced in dealing with electric skateboard repairs. Technicians should be versatile and up-to-date. They need to be adept at servicing various brands and models and staying current with cutting-edge advancements and technologies in the industry.
- Turnaround Time: Find out the projected timeline for completion. Contingent upon the intricacy of the problem, fixes could require anywhere from a few days to a couple of weeks.
- Cost: Inquire about the estimated cost of the repair. Some service centers may provide an initial free diagnosis. Be aware that the cost can vary depending on the nature and severity of the problem.
- Warranty on Repairs: A good repair shop will provide a warranty on their work. This gives you peace of mind knowing that if the issue reoccurs, they will fix it free of charge within the warranty period.
In conclusion, never hesitate to seek professional help when facing persistent or potentially hazardous issues with your electric skateboard. Their expertise is invaluable in ensuring that your board is not only functional but also safe for use. Your enjoyment and safety in electric skateboarding are paramount, so it's essential to ensure that your board is always in optimal working condition.
Whether you're a newbie to the world of electric skateboarding or a seasoned rider, this comprehensive guide has equipped you with the knowledge to diagnose and fix common charging issues. Meanwhile, never hesitate to seek professional help when facing persistent or potentially hazardous issues with your electric skateboard. Their expertise is invaluable in ensuring that your board is not only functional but also safe for use. Your enjoyment and safety in electric skateboarding are paramount, so it's essential to ensure that your board is always in optimal working condition.